منوی اصلی

سرور اچ پی DL360 Gen11 4LFF NC CTO P52498-B21

برای مشاوره محصول میتوانید به روی دکمه کلیک کنید دریافت مشاوره

ویژگی ها

Product Number

P52498-B21

Processor family

Not included as standard

Network Controller

"BCM 5719 1Gb 4p BASE-T OCP Adptr" to be defaulted in the configurator at OCP Slot 2. Customer is allowed to remove and select other cards (PCIe of OCP) from Networking OR InfiniBand OR Smart IO (HW) OR Storage Offload category. Choice of OCP3.0 or stand-up cards for primary networking selection plus additional/optional stand-up networking adapters. Notes: - No embedded networking from motherboard. - In 1 Processor configuration, “CPU1 to OCP2 x8 Enablement Kit” will be selected as default as OCP NIC is pre-selected at OCP Slot 2, to be defaulted in the configurator if 1 Processor is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU1 to OCP2 x8 Enablement Kit” will be removed. -“CPU2 to OCP2 x8 Enablement Kit” or “CPU2 to OCP2 x16 Enablement Kit” must be selected if OCP NIC is selected in 2 Processors configuration. “CPU2 to OCP2 x8 Enablement Kit” to be defaulted in the configurator if 2 Processors are selected. User should be allowed to remove “CPU2 to OCP2 x8 Enablement Kit” and should be forced select “CPU2 to OCP2 x16 Enablement Kit” if OCP NIC is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU2 to OCP2 x8 Enablement Kit” will be removed

مشاهده همه ویژگی ها
قیمت محصول: 90,000,000 تومان

مشخصات محصول

ویژگیمقدار
Product NumberP52498-B21
Processor familyNot included as standard
Network Controller"BCM 5719 1Gb 4p BASE-T OCP Adptr" to be defaulted in the configurator at OCP Slot 2. Customer is allowed to remove and select other cards (PCIe of OCP) from Networking OR InfiniBand OR Smart IO (HW) OR Storage Offload category. Choice of OCP3.0 or stand-up cards for primary networking selection plus additional/optional stand-up networking adapters. Notes: - No embedded networking from motherboard. - In 1 Processor configuration, “CPU1 to OCP2 x8 Enablement Kit” will be selected as default as OCP NIC is pre-selected at OCP Slot 2, to be defaulted in the configurator if 1 Processor is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU1 to OCP2 x8 Enablement Kit” will be removed. -“CPU2 to OCP2 x8 Enablement Kit” or “CPU2 to OCP2 x16 Enablement Kit” must be selected if OCP NIC is selected in 2 Processors configuration. “CPU2 to OCP2 x8 Enablement Kit” to be defaulted in the configurator if 2 Processors are selected. User should be allowed to remove “CPU2 to OCP2 x8 Enablement Kit” and should be forced select “CPU2 to OCP2 x16 Enablement Kit” if OCP NIC is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU2 to OCP2 x8 Enablement Kit” will be removed
Storage ControllerChoice of HPE ProLiant Gen11 MR and SR PCIe and OCP plug-in Controller
Hard Drive4LFF – default backplane x1 12G SAS/SATA Low Profile (LP) carrier support
Memory type32-DIMM slots
PCIe slotsPCIe 5.0. One standard primary/butterfly riser: 2 slots as Slot 1 & Slot 2 (1 x16 FH / 1 x16 LP) and 4x8 front NVMe connectors Optional: Slot 3 in 1 x16 FH or LP slot
System fan featuresChoice of: • 5 Standard Fans for one processor below 185W TDP (shipment available in Q2 2023) • Additional 2 Standard Fans for 2nd Processor, • High Performance Fan Kits and • Closed-loop Liquid Cooling Heat Sink Fan Bundle FIO Kit Notes: If Liquid Cooling HeatSink Fan FIO Bundle Kit is selected, then any Fans (Standard Fan Kit or High Perfformane Fan Kit) cannot be selected
Infrastructure managementHPE iLO with Intelligent Provisioning (standard) HPE GreenLake for Compute Ops Management (a 3-year subscription included) Optional: iLO Advanced and OneView
SecurityTPM2.0 (Trusted Platform Module) embedded Notes: Disabled on shipments to China
Form Factor1U Rack
Video OutputRear: 1 VGA Optional: • 1 Front Display Port (standalone in 8SFF; USB2.0+ Display Port bundle kit in 4LFF), • 1 Rear Serial Port
USBFront: 1 USB 3.2 Gen1 + iLO service port Rear: 2 USB 3.2 Gen1 Internal: 1 USB 3.2 Gen1 + 1 USB2.0 Optional: 1 Front USB 2.0
Rail KitOptional Easy Install rails and CMA Notes: Server does not support shelf mounted rail kits (“L” brackets).

سرور HPE DL360 Gen11 P52498-B2 با قابلیت Configure To Order است که سبب می‌شود مشتریان مشخصات سرور را متناسب با نیازهای خود تنظیم کنند.

  • اسلات حافظه:

32-DIMM slots

  • محفظه درایو:

4LFF

  • فن:

Choice of:

5 Standard Fans for one processor below 185W TDP (shipment available in Q2 2023)

Additional 2 Standard Fans for 2nd Processor,

High Performance Fan Kits and

Closed-loop Liquid Cooling Heat Sink Fan Bundle FIO Kit

در این‌جا به مشخصات کلیدی این سرور می‌پردازیم:

  • پردازنده: شاسی سرور از پردازنده‌های Intel Xeon Scalable پشتیبانی می‌کند، وطیف وسیعی از گزینه‌ها را برای عملکرد بهتر ارائه می‌دهد.
  • حافظه : از پیکربندی‌های مختلف حافظه پشتیبانی می‌کند و به مشتریان این امکان را می‌دهد تا مقدار مناسبی از رم  را بر اساس نیازهای حجم کاری خود انتخاب کنند.
  • ذخیره سازی: سرورHPE DL360 G11 تا چهار درایو 3.5 اینچی LFF را پشتیبانی می‌کند و گزینه‌های ذخیره سازی برای برنامه‌های مختلف و نیازهای داده را فراهم می‌کند.
  • مقیاس پذیری: شاسی سرور برای قرار دادن اجزای اضافی و گزینه‌های توسعه طراحی شده است و مقیاس پذیری را برای پاسخگویی به نیازهای مربوط به  رشد و توسعه در آینده فراهم می‌کند.
  • مدیریت: امکان مدیریت و نظارت از راه دور سرور را فراهم می‌کند و قابلیت‌های مدیریت سیستم را افزایش می‌دهد.

به طورکلی این سرور انعطاف‌پذیری و مقیاس‌پذیری را ارائه می‌دهد و به مشتریان این امکان را می‌دهد تا پیکربندی سرور را برای برآورده کردن نیازهای تجاری خاص و اهداف عملکرد خود تنظیم کنند.

 

CTO Server HPE DL360 Gen11 4LFF NC CTO Server
SKU Number P52498-B21
TAA SKU* P52498-B21#GTA
HPE Trusted Supply Chain Optional: P36394-B21
Processor Not included as standard
Drive Cage – included 4LFF – default backplane
x1 12G SAS/SATA
Low Profile (LP) carrier support
DIMM Slots 32-DIMM slots
DIMM Blanks DIMM Blanks are required, embedded and shipped as default in all CTO Servers
Storage Controller Choice of HPE ProLiant Gen11 MR and SR PCIe and OCP plug-in Controller.
PCIe Slots

PCIe 5.0.
One standard primary/butterfly riser: 2 slots as Slot 1 & Slot 2 (1 x16 FH / 1 x16 LP) and 4 x8 front NVMe connectors
Optional: Slot 3 in 1 x16 FH or LP slot

OCP3.0 Slots PCIe 5.0: 2 slots (1×16/ 1×16)
Network Controller “BCM 5719 1Gb 4p BASE-T OCP Adptr” to be defaulted in the configurator at OCP Slot 2.
Customer is allowed to remove and select other cards (PCIe of OCP) from Networking OR InfiniBand OR Smart IO (HW) OR Storage Offload category. Choice of OCP3.0 or stand-up cards for primary networking selection plus additional/optional stand-up networking adapters.
Notes:
No embedded networking from motherboard.
 In 1 Processor configuration, “CPU1 to OCP2 x8 Enablement Kit” will be selected as default as OCP NIC is pre-selected at OCP Slot 2, to be defaulted in the configurator if 1 Processor is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC. Meanwhile, the “CPU1 to OCP2 x8 Enablement Kit” will be removed.
“CPU2 to OCP2 x8 Enablement Kit” or “CPU2 to OCP2 x16 Enablement Kit” must be selected if OCP NIC is selected in 2 Processors configuration. “CPU2 to OCP2 x8 Enablement Kit” to be defaulted in the configurator if 2 Processors are selected. User should be allowed to remove “CPU2 to OCP2 x8 Enablement Kit” and should be forced select “CPU2 to OCP2 x16 Enablement Kit” if OCP NIC is selected. Customer is allowed to remove if OCP NIC is not selected but need to be replaced by a PCIe standup NIC.
Meanwhile, the “CPU2 to OCP2 x8 Enablement Kit” will be removed

Fans Choice of:
5 Standard Fans for one processor below 185W TDP (shipment available in Q2 2023)
Additional 2 Standard Fans for 2nd Processor,
High Performance Fan Kits and
Closed-loop Liquid Cooling Heat Sink Fan Bundle FIO Kit
Notes: If Liquid Cooling HeatSink Fan FIO Bundle Kit is selected, then any Fans (Standard Fan Kit or High Perfformane Fan Kit) cannot be selected
Management HPE iLO with Intelligent Provisioning (standard)
HPE GreenLake for Compute Ops Management (a 3-year subscription included)
Optional: iLO Advanced and OneView

Video Output Rear: 1 VGA
Optional:
1 Front Display Port (standalone in 8SFF; USB2.0+ Display Port bundle kit in 4LFF),
1 Rear Serial Port
USB Front: 1 USB 3.2 Gen1 + iLO service port
Rear: 2 USB 3.2 Gen1
Internal: 1 USB 3.2 Gen1 + 1 USB2.0
Optional: 1 Front USB 2.0

Security TPM2.0 (Trusted Platform Module) embedded
Notes: Disabled on shipments to China
Rail Kit Optional Easy Install rails and CMA
Notes: Server does not support shelf mounted rail kits (“L” brackets).
Form Factor 1U Rack

برای مشاهده موجود تمام مدل‌های سرور به صفحه‌ی خرید سرور HP مراجعه کنید. هم‌چنین می‌توانید برای اطلاع از موجودی انواع مدل و قیمت سرور HP G11 کلیک کنید. در ضمن می‌توانید مشخصات سایر پارت نامبرهای سرور DL360 G11 را از لینک نشان داده شده، مشاهده کنید.

نظرات کاربران

هیچ نظری برای این محصول ثبت نشده است.

ثبت نظر جدید

نظر خود را ثبت کنید