| Content | 
رابط:
- 1x10/100/1000/2500 Base-T RJ45,1 x10/100/1000Base-T RJ45 (802.3af PoE PSE),1xType A USB, 1xRS-232 RJ45 Serial Port
حداکثر مصرف برق:
- 25W without PSE out and 37.9W with PSE out
تعداد رادیو:
تعداد آنتن:
- 4dual band WiFi 1dual band scanning 1single band 2.4GHz BLE/ZigBee
| 
رابط:
-
1x100/1000/2500 Base-T RJ45,
1x10/100/1000 Base-T RJ45,
1xType A USB, 1x RS-232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
| 
رابط:
-
1x100/1000/2500Base-T RJ45,
1x10/100/1000Base-T RJ45,
1xType A USB, 1xRS-232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
|
ظرفیت ذخیره‌سازی:
فرم فکتور :
Desktop
مجموع رابط‌ها:
ذخیره‌سازی قابل استفاده (بعد از ریدبندی):
| FORTIANALYZER APPLIANCES |
FAZ-150G |
| Capacity and Performance |
|
| GB/ day of Logs |
25 |
| Analytic Sustained Rate (logs/sec)* |
500 |
| Collector Sustained Rate (logs/sec)* |
750 |
| Devices/VDOMs (Maximum) |
50 |
| Max Number of Days Analytics** |
90 |
| Hardware Specifications |
| Form Factor (supports EIA/non-EIA standards) |
Desktop |
| Total Interfaces |
2xRJ45 GE |
| Storage Capacity |
4TB(2x2TB) |
| Usable Storage (After RAID) |
2TB |
| Removable Hard Drives |
No |
| RAID Levels Supported |
0/1 |
| RAID Type |
Software |
| Default RAID Level |
1 |
| Redundant Hot Swap Power Supplies |
No |
| TPM Encryption |
Gen2 |
| Dimensions |
|
| Height x Width x Length (inches) |
9.5x3.5x8 |
| Height x Width x Length (cm) |
24.1x8.9x20.55 |
| Weight |
9.35lbs(4.24kg) |
| Environment |
| AC Power Supply |
100–240VAC, 50–60Hz |
| Power Consumption (Average / Maximum) |
36W/43W |
| Heat Dissipation |
147.4BTU/h |
| Operating Temperature |
32–104°F (0–40°C) |
| Storage Temperature |
-4–167°F (-20–75°C) |
| Humidity |
5to95%non-condensing |
| Operating Altitude |
Up to7,400ft(2,250m) |
| Compliance |
| Safety Certifications |
FCC Part 15 Class A, RCM, VCCI, CE,
UL/cUL, CB |
* Sustained Rate - حداکثر نرخ ثابت ثبت پیام که پلت فرم FAZ می‌تواند حداقل 48 ساعت بدون پایگاه داده SQL و کاهش عملکرد سیستم حفظ کند.
**حداکثر تعداد روز در صورت دریافت گزارش‌ها به طور مداوم با نرخ گزارش تجزیه و تحلیل پایدار. اگر میانگین نرخ ورود کمتر باشد، این عدد می‌تواند افزایش یابد. | 
پشتیبانی از فرم‌فکتورهای متنوع، انواع رسانه‌ها و توان عملیاتی، ماژول‌های Fortinet گزینه‌های اتصال را برای تعداد زیادی از معماری‌های مختلف شبکه و استقرار سناریوهای بسیاری، فراهم می‌کنند.
چه شبکه شما به 100GE پرسرعت نیاز دارد در داخل مرکز داده یا دوربرد 1GE برای اتصال داده‌هادر مراکز شهرهای مختلف، Fortinet یک ماژول مناسب برای رفع نیازهای شما دارد.
ویژگی‌های ماژول‌های فورتی‌نت:
- پشتیبانی از رابط‌های مختلف از جمله: SFP،SFP+، DAC و استانداردهای جدیدتر سرعت بالا از جمله SFP28،QSFP+، CFP2، و QSFP28.
- تست شده برای کار با تمامی تجهیزات فورتی‌نت و سازگاری کامل با آن‌ها
- حذف مشکلات اتصال به شبکه‌هایی با حداکثر زمان کاری با استفاده از ماژول‌های با کیفیت طراحی شده برای کار با تجهیزات فورتی‌نت
- ارائه ماژول‌های با کیفیت با صرف حداقل هزینه
| HARDWARE |
FN-TRAN-SX |
| Protocol Standard |
1000Base-SX |
| IEEE Standard |
802.3z |
| Module Type |
SFP |
| Data Link Rate for Ethernet |
1.25Gbps |
| Transmission Range |
220m / 500m |
| Media |
MM |
| Wavelength (nm) |
1310 |
| Connector Type |
Duplex LC |
| Power Dissipation |
<800mW |
| Operating Temperature Range |
0–70°C |
| Hot Plug |
Yes |
| Serial ID PROM |
Yes |
| Digital Monitoring |
Yes |
| Auto Negotiation |
Yes |
| Link Status |
Yes |
| 
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
- 8RP-SMA External and 1Bluetooth/BLE Internal
|
| Additional information |
| Hardware Type |
Outdoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
4dual band WiFi 1dual band scanning 1single band 2.4GHz BLE/ZigBee
|
| Antenna Type and Peak Gain |
WiFi and scanning radio dual band antenna: 5.5dBi in 2.4GHz and 7.2dBi in 5GHz band BLE antenna: 5.0dBi in 2.4GHz band
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 4x4Service
|
| Radio 2 Capabilities |
Frequency band: 5.0GHz Channel width: 4×4 20/40/80MHz and 2×2 160MHz contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO Chains: 4x4Service
|
| Radio 3 Capabilities |
Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1x1Frequency Scanning
|
| Maximum Data Rate |
Radio 1: up to 1147Mbps Radio 2: up to 2402Mbps Radio 3: Frequency scanning only
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @10dBm max TX power
|
| interface |
1x 10/100/1000/2500 Base-T RJ45,1 x 10/100/1000 Base-T RJ45 (802.3af PoE PSE),1xType A USB, 1x RS-232 RJ45 Serial Port
|
| poe-ports |
1 x 802.3bt PoE default Operational modes: No 802.3af support ; 1 x 802.at Operates in reduced power (17dBm) R1 & R2 in 4×4 chain
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz 30dBm / 1000mW (4chains combined) Radio 2: 5GHz 26dBm / 398mW (4chains combined) Radio 3: N/A
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bt, 802.3bz
|
| Per Radio Client Capacity |
Up to 512 clients per radio (Radio1 and Radio2)
|
| LED Off Mode |
Yes
|
| Rogue Scan radio modes |
Background, Dedicated
|
| WIPS / WIDS radio modes |
Background, Dedicated (recommended)
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| dimensions |
8.23×8.23×2.38inches (209x209x60.5mm)
|
| weight |
5.12lbs (2.325kg)
|
| Package (shipping) Weight |
12.56.93lbs (5.7kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Standard Mount kit for Ceiling, T-Rail, and Wall
|
| power-supplies |
802.3bt PoE, ships with PoE injector (reset functionality)
|
| Power Consumption (Maximum) |
25W without PSE out and 37.9W with PSE out
|
| PSE functionality |
Yes (while powered by PoE injector shipped with product)
|
| humidity |
10–90%non-condensing
|
| Operating / Storage Temperature |
'-22–140°F (-30 – 60°C) / -40–176°F (-40–80°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
No
|
| time-between-failures |
>10 years
|
| IP Rating |
IP67
|
| Surge Protection Built In |
Yes
|
| Hit-less PoE Failover |
N/A
|
| WiFi Alliance Certified |
No
|
| DFS |
No
|
|
| Hardware Type |
Indoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
5Internal 1BLE Internal
|
| Antenna Type and Peak Gain |
PIFA: 4dBi for 2.4GHz, 5dBi for 5GHz
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
Frequency Band: 2.4GHz Channel width: 4×4 20/40MHz Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO chains: 4x4service
|
| Radio 2 Capabilities |
Frequency Band: 5.0GHz Channel width: 4×4 20/40/80MHz and 2×2 160MHz contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 Mimo chains: 4x4service
|
| Radio 3 Capabilities |
Frequency band: 2.4/5.0GHz MIMO chains: 1x1frequency scanning
|
| Maximum Data Rate |
Radio 1: up to 1147Mbps Radio 2: up to 2402Mbps Radio 3: scan only
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @6dBm max TX power
|
| interface |
1x 100/1000/2500Base-T RJ45,1 x10/100/1000Base-T RJ45,1xType A USB, 1xRS-232 RJ45 Serial Port
|
| poe-ports |
1port is connected to 802.3af – No USB support, Operate in 2×2 mode with reduced power R1/R2 17dBm(Tx power), 1port powered by 802.3at or 2ports powered by 802.3af – Full System functionality USB support, 802.3at PoE default
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz 24dBm / 251mW (4chains combined) Radio 2: 5GHz 23dBm / 200mW (4chains combined) Radio 3: NA
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz
|
| SSID Types Supported |
Local-Bridge, Mesh, Tunnel
|
| Per Radio Client Capacity |
512per Radio1 and Radio2
|
| Reset Button |
Yes
|
| LED Off Mode |
Yes
|
| Rogue Scan Radio Mode |
Background, Dedicated
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| Dimensions |
8.27×8.27×2.22inches (210x210x56.5mm)
|
| Weight |
2.16lbs (0.98kg)
|
| Package (shipping) Weight |
3.97lbs (1.8kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Mount kit for Ceiling, T-Rail and Wall
|
| power-supplies |
SP-FAP400-PA-XX or GPI-130
|
| humidity |
5–90%non-condensing
|
| Operating / Storage Temperature |
32–113°F (0–45°C) / -31–94°F (-35–70°C)
|
| Directives |
Low Voltage Directive •RoHS
|
| UL2043 Plenum Material |
NO
|
| time-between-failures |
>10 years
|
| IP Rating |
_
|
| Surge Protection Built In |
Yes
|
| Hit-less PoE Failover |
Yes
|
| Wi-Fi Alliance Certified |
Yes
|
| DFS |
FCC, IC, CE, Japan, Korea, Taiwan
|
|
| Hardware Type |
Indoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
5External (RP-SMA) 1BLE Internal
|
| Antenna Type and Peak Gain |
Omni directional rubber duck antenna: 4dBi for 2.4GHz, 6dBi for 5GHz
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
Frequency Band: 2.4GHz Channel width: 4×4 20/40MHz Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 MIMO chains: 4x4service
|
| Radio 2 Capabilities |
Frequency Band: 5.0GHz Channel width: 4×4 20/40/80MHz and 2×2 160MHz contiguous Modulation: BPSK, QPSK, QAM64, QAM256, and QAM1024 Mimo chains: 4x4service
|
| Radio 3 Capabilities |
Frequency band: 2.4/5.0GHz MIMO chains: 1x1frequency scanning
|
| Maximum Data Rate |
Radio 1: up to 1147Mbps Radio 2: up to 2402Mbps Radio 3: scan only
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @6dBmmax TX power
|
| Interfaces |
1×100/1000/2500Base-T RJ45, 1×10/100/1000Base-T RJ45, 1xType A USB, 1xRS-232 RJ45 Serial Port
|
| poe-ports |
1port is connected to 802.3af – No USB support, Operate in 2×2 mode with reduced power R1/R2 17dBm(Tx power), 1port powered by 802.3at or 2ports powered by 802.3af – Full System functionality USB support, 802.3at PoE default
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz 24dBm / 251mW (4chains combined) Radio 2: 5GHz 23dBm / 200mW (4chains combined)* Radio 3: NA
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i,802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz
|
| SSID Types Supported |
Local-Bridge, Mesh, Tunnel
|
| Per Radio Client Capacity |
512per Radio1 and Radio2
|
| Reset Button |
Yes
|
| LED Off Mode |
Yes
|
| Rogue Scan Radio Mode |
Background, Dedicated
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| dimensions |
8.27×8.27×2.22inches (210x210x56.5mm)
|
| weight |
2.19lbs (0.995kg)
|
| Package (shipping) Weight |
4.4lbs (2kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Mount kit for Ceiling, T-Rail and Wall. 5 RP-SMA Male dual-band dipole antenna
|
| power-supplies |
SP-FAP400-PA-XX or GPI-130
|
| humidity |
5–90%non-condensing
|
| Operating / Storage Temperature |
32–113°F (0–45°C) / -31–-94°F (-35–70°C)
|
| Directives |
Low Voltage Directive •RoHS
|
| UL2043 Plenum Material |
No
|
| time-between-failures |
>10 years
|
| IP Rating |
_
|
| Surge Protection Built In |
Yes
|
| Hit-less PoE Failover |
Yes
|
| Wi-Fi Alliance Certified |
Yes
|
| DFS |
FCC, IC, CE, Japan, Korea, Taiwan
|
|
| gb-day-of-logs |
25
|
| sustained-rate |
750
|
| devices-vdoms-maximum |
50
|
| max-number-of-days |
90
|
| form-factor |
Desktop
|
| total-interfaces |
2 x RJ45 GE
|
| storage-capacity |
4TB (2x 2TB)
|
| usable-storage-after-raid |
2TB
|
| removable-hard-drives |
NO
|
| raid-levels-supported |
RAID 0/1
|
| raid-type |
Software
|
| default-raid-level |
1
|
| redundant-power-sup |
NO
|
| dimensions |
24.1×8.9×20.55(cm), 9.5×3.5×8(inches)
|
| weight |
9.35lbs (4.24kg)
|
| ac-power-supply |
100–240V AC, 50-60Hz
|
| power-cnsp-ave-max |
36W/ 43W
|
| heat-dissipation |
147.4BTU/h
|
| operating-temperature |
32°to104°F (0° to 40°C)
|
| storage-temperature |
-4–167°F (-20–75°C)
|
| humidity |
5–95% non-condensing
|
| operating-altitude |
Up to 7,400ft (2,250m)
|
| safety-certifications |
FCC Class A Part 15, RCM, VCCI, CE, UL/cUL, CB
|
|
| Protocol Standard |
1000Base-SX
|
| IEEE Standard |
802.3z
|
| Module Type |
SFP
|
| Data Link Rate for Ethernet |
1.25Gbps
|
| Transmission Range |
220m / 500m
|
| Media |
MM
|
| Wavelength (nm) |
1310
|
| Connector Type |
Duplex LC
|
| Power Dissipation |
<800mW
|
| Operating Temperature Range |
0–70°C
|
|
| Hardware Type |
Indoor Universal AP
|
| Number of Radios |
2
|
| Number of Antennas |
8RP-SMA External and 1Bluetooth/BLE Internal
|
| Peak Antenna Gain |
3dBi for 2.4GHz, 3dBi for 5GHz
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.851
|
| Frequency of Radio 1 |
2.4GHz b/g/n, 20/40MHz (64 QAM)
|
| Frequency of Radio 2 |
5GHz a/n/ac, 20/40/80/160MHz (256 QAM)
|
| Maximum Data Rate |
Radio 1: up to 800Mbps Radio 2: up to 3.46Gbps
|
| Radio Chains / Streams |
4×4 / 4 spatial streams
|
| Bluetooth Low Energy (BT/BLE) Radio |
4dBm Transmit Power (class2), -94dBm Receive Sensitivity
|
| Ethernet Ports |
2xGE RJ45, LLDP
|
| USB Port |
1xType A
|
| Serial Console Port |
1 RS-232 x RJ45
|
| Power over Ethernet (PoE) |
Dual redundant PoE power ports with support for IEEE 802.3at (2×2 @ 17 dBm with 802.3af; USB disabled)
|
| Simultaneous SSIDs |
16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA and WPA2 with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist
|
| Maximum Tx Power |
2.4GHz band – 22.0dBm 5.0GHz band – 20.0dBm
|
| Physical Security |
Kensington Lock
|
| IEEE Standards |
802.11a, 802.11ac, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1x, 802.3af, 802.3at, 802.3az
|
| FortiPresence Capable |
Yes, when managed by controller
|
| Wireless Mesh Capable |
Yes
|
| Modes of Operation |
WLC 8.2 (min.), FortiGate, (FortiCloud – Future)
|
| SSID Types Supported |
Local-Bridge, Tunnel & Mesh (when managed by controller)
|
| Concurrent Clients Per Radio (Maximum / Recommended) |
Up to 256 / Dependent on use case
|
| LED Off Mode |
Yes
|
| Frequencies Scanned |
2.4 and 5GHz
|
| Background Scan with Client Access on 2.4 and 5 GHz |
Yes
|
| Full-time Scan as Dedicated Monitor |
Yes
|
| Full-time Scan with Client Access |
No
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes — Dedicated chipset
|
| Dimensions |
8.46×8.46×2.2(inches) 215x215x56(mm)
|
| Weight |
3.4lb (1.53kg)
|
| Package (shipping) Weight |
5.36lb (2.43kg)
|
| Mounting Options |
Ceiling, T-Rail and Wall
|
| Included Accessories |
Ceiling, T-Rail and wall mount kit and 8 dipole antennas (AC power adapter sold separately)
|
| Power Supply |
Adapter input: 100-240V, 50/60 Hz, 0.9A Max output: 12V DC, 3A
|
| Power Consumption (Maximum) |
24.58W
|
| Humidity |
5–90% non condensing
|
| Operating Temperature |
'-4–122˚F (-20–50˚C)
|
| Storage Temperature |
'-40–158°F (-40–70°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
Yes
|
| Mean Time Between Failures |
>30Years
|
| Hit-less PoE Failover |
Yes
|
| Safety - FCC |
FCC Part 15 Subpart B (Class B), Subpart C and Subpart E
|
| Safety - UL |
UL 609550-1, UL 2043, CSA C22.2 No. 60950-1
|
| Safety - CB |
IEC 60950-1
|
| RF - IC |
RSS-210, RSS-GEN, RSS-102, ICES-003
|
|
نقد و بررسی‌ها
هیچ دیدگاهی برای این محصول نوشته نشده است.