| Content | 
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
- 6Internal plus 1Bluetooth
| 
رابط:
- 2x10/100/1000 Base-T RJ45, 1xType 2.0 USB, 1xRS232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
| 
رابط:
- 2x 10/100/1000 Base-T RJ45, 1x RS-232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
| 
رابط:
- 4x10/100/1000Base-T RJ45 Ports (1x802.3at PoE (PD), 1x802.3af PoE (PSE), 2xNon-PoE Ports), 1Pass-through in RJ45, 1Pass-through out RJ45
حداکثر مصرف برق:
- 24W (Depends on PoE connected and USB power consumed)
تعداد رادیو:
- 1(can operate as 2) 1BT/BLE
تعداد آنتن:
| 
رابط:
- 2x10/100/1000Base-T RJ45, 1xType 2.0 USB, 1xRS-232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
- 3Dual band Internal Wi-Fi 1BLE/ZigBee
| 
رابط:
-
6x10/100/1000 Base-T RJ45 Ports (1x802.3at PoE (PD), 1x802.3af PoE (PSE), 2xNon-PoE Ports, 1xPass-through in, 1xPass-through out, 1xRS-232 RJ45 Serial Port
حداکثر مصرف برق:
تعداد رادیو:
تعداد آنتن:
|
| Additional information |
| Hardware Type |
Indoor Universal AP
|
| Number of Radios |
2
|
| Number of Antennas |
6Internal plus 1Bluetooth
|
| Peak Antenna Gain |
4.5dBi for 2.4 GHz, 6.5dBi for 5GHz with 30degree downtilt for ceiling mount
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Frequency of Radio 1 |
2.4GHz b/g/n (3×3:3 stream) 20/40Mhz (64 QAM)
|
| Frequency of Radio 2 |
5GHz a/n/ac (3×3:3 stream) 20/40/80/160MHz (256 QAM) MU-MIMO 2simultanous devices
|
| Maximum Data Rate |
Radio 1: up to 450Mbps Radio 2: up to 2340Mbps
|
| Radio Chains / Streams |
3×3 / 3 spatial streams
|
| Bluetooth Low Energy (BT/BLE) Radio |
Yes
|
| Ethernet Ports |
2xGE RJ45, LLDP
|
| USB Port |
1xType A
|
| Serial Console Port |
1RS-232 x RJ45
|
| Power over Ethernet (PoE) |
IEEE 802.3at (3×3 @ 20 dBm with 802.3af; USB disabled)
|
| Simultaneous SSIDs |
Up to 16 (Dependant on mode)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA and WPA2 with 802.1x or Preshared key, WEP and Web Captive Portal, MAC blacklist & whitelist
|
| Maximum Tx Power |
2.4GHz: 21.5dBm (141mW) 5GHz:19.5dBm (90mW)
|
| Physical Security |
Kensington Lock
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11n, 802.1x, 802.3af, 802.11ac, 802.3at, 802.3az, 802.3ad
|
| FortiPresence Capable |
Yes
|
| Wireless Mesh Capable |
Yes
|
| Modes of Operation |
WLC 8.3.3 (min.), FortiGate, (FortiCloud – Future)
|
| SSID Types Supported |
Local-Bridge, Tunnel & Mesh (when managed by controller)
|
| Concurrent Clients Per Radio (Maximum / Recommended) |
256 / 80
|
| LED Off Mode |
Yes
|
| Frequencies Scanned |
2.4 and 5GHz
|
| Background Scan with Client Access on 2.4 and 5 GHz |
Yes
|
| Full-time Scan as Dedicated Monitor |
Yes
|
| Full-time Scan with Client Access |
No
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes — Dedicated chipset
|
| Dimensions |
8.58×8.58×1.69(inches) 218x218x43(mm)
|
| Weight |
2.24lb (1016.5g)
|
| Package (shipping) Weight |
3.73lb (1694g)
|
| Mounting Options |
Wall, T-Rail & Ceiling Mounting
|
| Included Accessories |
Ceiling, T-Rail and wall mount kit (AC power adapter sold separately)
|
| Power Supply |
Adapter input: 100-240V, 50/60 Hz, 0.9A Max output: 12V DC, 3A
|
| Power Consumption (Maximum) |
20W
|
| Humidity |
5–90% non condensing
|
| Operating Temperature |
32–122°F (0–50°C)
|
| Storage Temperature |
'-40–158°F (-40–70°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
Yes
|
| Mean Time Between Failures |
>30 Years
|
| Hit-less PoE Failover |
Yes
|
| Safety - FCC |
FCC Part 15 Subpart B (Class B), Subpart C and Subpart E
|
| Safety - UL |
UL 609550-1, UL 2043, CSA C22.2 No. 60950-1
|
| Safety - CB |
IEC 60950-1
|
| RF - IC |
RSS-210, RSS-GEN, RSS-102, ICES-003
|
|
| Hardware Type |
Indoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
4Dual band WiFI 2WiFi Dual band Scanning 1Single band 2.4GHz BLE/ZigBee
|
| Antenna Type and Peak Gain |
PIFA antenna Dual band: 3.97dBi for 2.4GHz and 5.89dBi for 5GHz Single band 5Ghz antenna 5dBi for 2.4GHz band BLE antenna 3.5dBi at 2.4GHz band
|
| Radio 1 Capabilities |
Band: 2.4GHz or 5.0GHz(High Band) a/b/g/n/ac/ax (2×2:2 stream) Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM
|
| Radio 2 Capabilities |
5.0GHz a/b/g/n/ac/ax (2×2:2 stream) Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024QAM
|
| Radio 3 Capabilities |
Service: (2×2:2 stream) Band: 2.4GHz service b/g/n/ax Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024QAM Scan: dual band scan
|
| Maximum Data Rate |
Radio 1: up to 1201Mbps Radio 2: up to 1201Mbps Radio 3: up to 574Mbps
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @10dBm max TX power
|
| Interfaces |
2×10/100/1000 Base-T RJ45, 1xType 2.0 USB, 1xRS232 RJ45 Serial Port
|
| Power over Ethernet (PoE) |
1×802.3at PoE default 1×802.af PoE with reduce TX power and no USB function
|
| Simultaneous SSIDs |
Up to 24 (21 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist and allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz: 23dBm / 200mW (2chains combined) 5GHz: 22dBm / 158mW (2chains combined) Radio 2: 5GHz: 22dBm / 158mW (2chains combined) Radio 3: 2.4GHz: 23dBm / 200mW (2chains combined) 5GHz: 22dBm /158mW (2 chains combined)
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w,802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
|
| SSID Types Supported |
Local-Bridge, Tunnel, and Mesh
|
| Per Radio Client Capacity |
Up to 512 clients per radio (all radios)
|
| Cellular Co-existence* |
Yes
|
| Reset Button |
Yes
|
| LED Off Mode |
Yes
|
| Rogue Scan radio modes |
Background, Dedicated
|
| WIPS / WIDS radio modes |
Background, Dedicated (recommended)
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| Dimensions |
6.5×6.5×2.05inches(165x165x52mm)
|
| Weight |
1.5lbs (0.68kg)
|
| Package (shipping) Weight |
2.6lbs (1.185kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Standard Mount kit for Ceiling, T-Rail and Wall
|
| Power Supply |
GPI-130 or SP-FAP250-PAX-10
|
| Power Consumption (Maximum) |
18.5W
|
| Humidity |
5 – 90% non condensing
|
| Operating / Storage Temperature |
32–122°F (0 – 50°C) / -22–158°F (-30–70°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
Yes
|
| Mean Time Between Failures |
> 10Years
|
| IP Rating |
N/A
|
| Surge Protection Built In |
'–
|
| Hit-less PoE Failover |
N/A
|
| WiFi Alliance Certified |
No
|
| DFS |
No
|
|
| Hardware Type |
Ruggedized indoor/outdoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
2dual band WiFi 1dual band scanning 1single band 2.4GHz BLE/ZigBee
|
| Antenna Type and Peak Gain |
Directional patch antenna Single band antennas: 10dBi in 2.4GHz band, 10dBi in 5.0GHz band Scanning radio: 3.5dBi in 2.4GHz band and 4.5dBi in 5GHz band BLE antenna: 3.5dBi in 2.4GHz band
|
| Antenna Beam Width |
2.4GHz Horizontal BW 70degree Vertical BW 30degree 5.0GHz Horizontal BW 78degree Vertical BW 25degree
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2×2 Service
|
| Radio 2 Capabilities |
Frequency band: 5.0GHz Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2×2 Service
|
| Radio 3 Capabilities |
Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1x1Frequency Scanning
|
| Maximum Data Rate |
Radio 1: up to 574Mbps Radio 2: up to 1200Mbps Radio 3: Frequency scanning only
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @10dBm max TX power
|
| Interfaces |
2×10/100/1000Base-T RJ45, 1xRS-232 RJ45 Serial Port
|
| poe-ports |
1 port is connected to 802.3af – No USB support,Operate in 2×2 mode with reduced Tx power R1/R2 17dBm, 1 port powered by 802.3at or 2 ports powered by 802.3af – Full System functionality, 802.3at PoE default( Ships with Passive PoE injector)
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/EAPMSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz: 27dBm / 500mW (2chains combined) Radio 2: 5GHz: 25.5dBm / 354mW (2 chains combined) Radio 3: N/A
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11w, 802.11ac, 802.11ax (Wi-Fi 6), 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az, 802.3bz
|
| SSID Types Supported |
Local-Bridge, Tunnel, and Mesh
|
| Per Radio Client Capacity |
Up to 512clients per radio (Radio1 and Radio2)
|
| LED Off Mode |
Yes
|
| Rogue Scan radio modes |
Background, Dedicated
|
| WIPS / WIDS radio modes |
Background, Dedicated (recommended)
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| dimensions |
12.45×8.6×1.66 inches (316x218x42mm)
|
| Weight |
2.88lbs (1.307kg)
|
| Package (shipping) Weight |
7.93lbs (3.6kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Standard Mount kit for Ceiling, T-Rail, and Wall
|
| power-supplies |
802.3at PoE: GPI-130 ; ships with PoE Injector (reset functionality)
|
| PSE functionality |
No
|
| Power Consumption (Maximum) |
15.5W
|
| Humidity |
10 – 90%non condensing
|
| Operating / Storage Temperature |
'-22–140°F (-40 – 60°C) / -40–176°F (-40–80°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
NO
|
| IP Rating |
IP67
|
| time-between-failures |
>10 years
|
| Surge Protection Built In |
Yes
|
| Hit-less PoE Failover |
N/A
|
| WiFi Alliance Certified |
Yes
|
| DFS |
CE, A
|
|
| Hardware Type |
Wall Plate AP
|
| Number of Radios |
1(can operate as 2) 1BT/BLE
|
| Number of Antennas |
2Internal 1BT/BLE Internal
|
| Antenna Type and Peak Gain |
Patch: 3dBi for 2.4GHz, 4dBi for 5GHz
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
2.4GHz b/g/n (2×2:2 stream) 20/40MHz (64 QAM) or 5GHz a/n/ac (2×2:2 stream) 20/40/80MHz (256 QAM) or 2.4GHz b/g/n (1×1:1 stream) 20/40MHz (64 QAM) & 5GHz a/n/ac (1×1:1 stream) 20/40/80MHz (256 QAM)
|
| Radio 2 Capabilities |
ـ
|
| Maximum Data Rate |
up to 867Mbps
|
| Bluetooth Low Energy (BT/BLE) Radio |
Bluetooth scanning and iBeacon advertisement @4dBm max TX power
|
| Interfaces |
4×10/100/1000 Base-T RJ45 Ports (1×802.3at PoE (PD), 1x 802.3af PoE (PSE), 2x Non-PoE Ports), 1Pass-through in RJ45, 1Pass-through out RJ45
|
| Power over Ethernet (PoE) |
802.3af (max PSE output of 4W) or 802.3at (full 802.3af PSE output)
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA and WPA2 with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist
|
| Maximum Tx Power |
2.4GHz: 23dBm / 200mW (2chains combined) 5GHz: 21dBm / 126mW (2chains combined)
|
| Kensington Lock |
No
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az, 802.3ad
|
| SSID Types Supported |
Local-Bridge, Tunnel
|
| Per Radio Client Capacity |
Up to 128
|
| LED Off Mode |
Yes
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| Dimensions |
6.1×3.7×1.2inches(155 x 95 x 31mm)
|
| Weight |
0.569lbs (0.258kg)
|
| Package (shipping) Weight |
1.34lbs (0.606kg)
|
| Mounting Options |
Wall plate or desk stand
|
| Included Accessories |
Mounting kit for wall plate
|
| Power Supply |
SP-FAPU24-PA-XX, GPI-115, or GPI-130
|
| Power Consumption (Max.) |
24W (Depends on PoE connected and USB power consumed)
|
| Humidity |
10% to 90%non-condensing
|
| Operating Temperature |
32 to 122°F (0–50°C)
|
| Storage Temperature |
'-22 to 104˚F (-30 to 70˚C)
|
| Directives |
RoHS
|
| UL2043 Plenum Material |
No
|
| Mean Time Between Failures |
>30Years
|
| IP Rating |
—
|
| Surge Protection Built In |
—
|
| Hit-less PoE Failover |
No
|
| WiFi Alliance Certified |
Yes
|
| DFS |
CE
|
|
| Hardware Type |
Indoor AP
|
| Number of Radios |
3 1BLE
|
| Number of Antennas |
3Dual band Internal Wi-Fi 1BLE/ZigBee
|
| Antenna Type and Peak Gain |
PIFA antenna Dual band: 4.5dBi for 2.4Ghz and 5.5dBi for 5GHz BLE antenna 4.0dBi at 2.4GHz band
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
Frequency band: 2.4GHz Channel width: 20/40MHz Modulation: BPSK, QPSK, 64/256/1024QAM MIMO Chains: 2x2Service
|
| Radio 2 Capabilities |
Frequency band: 5.0GHz Channel width: 20/40/80MHz Modulation: BPSK, QPSK, 64/256/1024 QAM MIMO Chains: 2×2 Service
|
| Radio 3 Capabilities |
Frequency bands: 2.4GHz and 5.0GHz MIMO Chains: 1×1 Frequency Scanning
|
| Maximum Data Rate |
Radio 1: up to 574Mbps Radio 2: up to 1201Mbps Radio 3: Frequency scanning only
|
| Bluetooth Low Energy Radio |
Bluetooth scanning and iBeacon advertisement @10dBm max TX power
|
| interface |
2×10/100/1000Base-T RJ45, 1xType 2.0 USB, 1xRS-232 RJ45 Serial Port
|
| poe-ports |
x802.3at PoE default,1 x 802.af PoE no USB function
|
| Simultaneous SSIDs |
Up to 16 (14 if background scanning enabled)
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA™, WPA2™, and WPA3™ with 802.1x or Preshared key, WEP, Web Captive Portal, MAC blocklist & allowlist
|
| Maximum Tx Power (Conducted) |
Radio 1: 2.4GHz: 23dBm / 200mW (2chains combined) Radio 2: 5GHz: 22dBm / 158mW (2chains combined) Radio 3: NA
|
| Kensington Lock |
Yes
|
| IEEE Standards |
802.11a, 802.11b, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.11ax, 802.1Q, 802.1X, 802.3ad, 802.3af, 802.3at, 802.3az
|
| SSID Types Supported |
Local-Bridge, Tunnel, and Mesh
|
| Per Radio Client Capacity |
Up to 512 clients per radio (Radio1 and Radio2)
|
| Reset Button |
Yes
|
| LED Off Mode |
Yes
|
| Rogue Scan radio modes |
Background, Dedicated
|
| WIPS / WIDS radio modes |
Background, Dedicated (recommended)
|
| Packet Sniffer Mode |
Yes
|
| Spectrum Analyzer |
Yes
|
| dimensions |
6.0×6.0x2.86inches (153.2×153.2×53.0mm)
|
| weight |
1.0lbs (0.543kg)
|
| Package (shipping) Weight |
2.1lbs (0.95kg)
|
| Mounting Options |
Ceiling, T-Rail, and Wall
|
| Included Accessories |
Standard Mount kit for Ceiling, T-Rail, and Wall
|
| power-supplies |
802.3at PoE SP-FAP200-PA-XX or GPI-130
|
| Power Consumption (Maximum) |
17W
|
| humidity |
5–90%non-condensing
|
| Operating / Storage Temperature |
32–122°F (0 – 50°C) / -22–158°F (-30–70°C)
|
| Directives |
Low Voltage Directive • RoHS
|
| UL2043 Plenum Material |
No
|
| time-between-failures |
>10 years
|
| IP Rating |
_
|
| Surge Protection Built In |
Yes
|
| Hit-less PoE Failover |
N/A
|
| WiFi Alliance Certified |
No
|
| DFS |
CE
|
|
| Indoor/Outdoor Deployment |
Wall Plate AP
|
| Number of Radios |
2
|
| Number of Antennas |
4Internal
|
| Antenna Type and Peak Gain |
Chip: 1.5dBi for 2.4GHz, 2dBi for 5GHz
|
| Frequency Bands (GHz) |
2.400–2.4835, 5.150–5.250, 5.250–5.350, 5.470–5.725, 5.725–5.850
|
| Radio 1 Capabilities |
2.4GHz b/g/n (2×2:2 stream) 20/40MHz (64 QAM)
|
| Radio 2 Capabilities |
5GHz a/n/ac (2×2:2 stream) 20/40/80MHz (256 QAM)
|
| Maximum Data Rate |
Radio 1: up to 300Mbps Radio 2: up to 867Mbps
|
| Bluetooth Low Energy (BT/BLE) Radio |
—
|
| interface |
6×10/100/1000 Base-T RJ45 Ports (1x 802.3at PoE (PD), 1×802.3af PoE (PSE), 2xNon-PoE Ports, 1xPass-through in, 1xPass-through out, 1xRS-232 RJ45 Serial Port
|
| Serial Console Port |
1xRJ45 RS232
|
| poe-ports |
802.3af (max PSE output of 4W) or 802.3at (full 802.3af PSE output)
|
| Simultaneous SSIDs |
Up to 16
|
| EAP Type(s) |
EAP-TLS, EAP-TTLS/MSCHAPv2, EAPv0/EAP-MSCHAPv2, PEAPv1/EAP-GTC, EAP-SIM, EAP-AKA, EAP-FAST
|
| User/Device Authentication |
WPA and WPA2 with 802.1xor Preshared key, WEP, Web Captive Portal, MAC blacklist & whitelist
|
| Maximum Tx Power |
23dBm / 100mW (2chains combined)
|
| Kensington Lock |
No
|
| IEEE Standards |
802.11a, 802.11b, 802.11d, 802.11e, 802.11g, 802.11h, 802.11i, 802.11j, 802.11k, 802.11n, 802.11r, 802.11v, 802.11ac, 802.1X, 802.3af, 802.3at, 802.3az
|
| SSID Types Supported |
Local-Bridge, Tunnel
|
| Per Radio Client Capacity |
Up to 64
|
| LED Off Mode |
Yes
|
| Packet Sniffer Mode |
No
|
| Spectrum Analyzer |
No
|
| Dimension |
6.69×4.04×1.08inches (170×102.5×27.5mm)
|
| Weight |
1.3lbs (0.6kg)
|
| Package (shipping) Weight |
1.6lbs (0.74kg)
|
| Mounting Options |
Wall Plate
|
| Included Accessories |
Mounting kit for Wall Plate
|
| Power Consumption (Max.) |
Depends on PoE connected
|
| Directives |
Low Voltage Directive • RoHS2
|
| power-supplies |
GPI-115, or GPI-130
|
| humidity |
5–90%non-condensing
|
| operating-temperature |
32°to104°F (0° to 40°C)
|
| storage-temperature |
'-4–158°F(-20–70°C)
|
| UL2043 Plenum Material |
No
|
| IP Rating |
_
|
| time-between-failures |
>10 years
|
| Surge Protection Built In |
—
|
| Hit-less PoE Failover |
No
|
| WiFi Alliance Certified |
No
|
| DFS |
In Process
|
|
نقد و بررسی‌ها
هیچ دیدگاهی برای این محصول نوشته نشده است.